We use different method for each surface to remediate mold
Mold is often undetectable in homes until it has become a significant problem. Not every type of mold has that distinctive, ‘musty’ odor and if the growth started behind a wall or in the attic, the smell is not noticeable until the mold has grown into a large colony of spores.
Restoring a home due to the effects of mold damage is a task that needs a professional service. SERVPRO of Rockville-Olney & Silver Spring North have trained crews on 24-hour notice to support our neighbors and customers. We have some of the best-trained personnel in the industry to safely remove & remediate mold from the property.
The technicians first determine the type of surface infested. This inspection decides both the cleaning methods needed and how much time may be required to complete the job. We usually divide surfaces into porous, nonporous and semi-porous categories.
Porous surfaces are typically building materials and fabrics; drywall and upholstery for example. They are often cleanable, but if the mold is very thick or has grown into the material, we dispose of it. Our cleaning methods for these surfaces involve vacuuming them with special HEPA filters that catch tiny amounts of loose mold, even a single spore.
After vacuuming, we move on to using spray bottles with an antimicrobial cleaner and foaming agents to dampen the surface. Wetting loosens the mold and allows technicians to remove it with cloths and sponges.
Nonporous surfaces are the easiest to clean. This category includes metal and glass tabletops, as well as marble and smooth stone kitchen countertops. In many cases, we can remove the mold with dry cloths and sponges. Technicians wipe down the surfaces from top to bottom to prevent accidentally leaving spores at the top or along the sides. If the mold layer is thick, we vacuum it first before dry wiping.
Semi-porous surfaces (concrete and wood decks for example) require methods not acceptable on other surfaces. Affected surfaces may need sanding to wire brushing and other abrasive tools to dig out the mold. The cleaners we use on these surfaces would mar or otherwise destroy glass and metal surfaces. If mold has penetrated the surface of the wood or concrete, technicians may have to sand them down by hand or with a power sander to remove it.
Returning your home to its pre-mold condition is not a quick or easy set of processes. SERVPRO of Rockville-Olney, Silver Spring North and our Prince George's franchises SERVPRO of Laurel/Greenbelt-Beltsville have years of experience in helping our customers through each step, to put you back into your home.
Call us at 301-340-1313 today to set up an inspection.